RECYCLED PIPE
Unlike PVC, concrete or FRP/GRP, HDPE is completely recycled in New Zealand. INFRAPIPE reprocesses all production waste but for ECOPIPE we also purchase post-consumer recycling (when available) to incorporate into the pipe. An SN4 DN600 for instance can contain as many as 3000 milk bottles. See here for more details.
- Request a Quote
- Call us: 09 869 3030
- Email: [email protected]
- Office: 3 Averton Place East Tamaki Auckland 2013
Why choose ECOPIPE™?
Beyond the obvious environmental advantages, there are multiple benefits to ECOPIPE™ that can help save time and money during the installation and over its lifetime:
- Up to 3,200mm in diameter.
- High chemical and abrasion resistance.
- Low asset maintenance.
- Uses recycled plastic.
- 100-year life expectancy.
ECOPIPE™ can be adapted in many ways to fit to existing concrete, PE or PVC culverts and even have flood gates attached if required.
- Light and easy to handle – a DN1500 ECOPIPE™ pipe weighs 114kg/m vs a 1500 Class 4 concrete pipe which weighs 1,623kg/m.
- We calculate the exact load requirement for your unique application, so you only pay for the pipe strength you need.
- Smooth interior/bore to increase flow rates.
- Socket (female) / Spigot (male) push fit connections to quickly connect to other pipes.
- Pipe can be drilled/perforated for drainage and it does not affect its strength.
- Pipes can be manufactured to length to save cost and wastage.
Installation Guidelines
It is important to install ECOPIPE™ properly as this will guarantee a long service life and ensure that there is no risk of structural damage.
The installation of these pipes is based on a granular backfill like gravel or sand that must be compacted as much as possible (to 95% MDD). This gives the pipe adequate side support to sustain the soil and vehicle loadings throughout the culvert’s life.
Please contact INFRAPIPE™ ([email protected]) if you have any questions regarding the installation or supply of HDPE culvert pipes.
INFRAPIPE™ Rural/Forestry Culvert Pipes are designed and manufactured to produce zero toxic leaching.
ECOPIPE™ Dimensions & Weight
All pipes 6000mm long – 5800mm when joined.
SN4 | SN8 | ||||
ID | OD | WEIGHT | ID | OD | WEIGHT |
600 mm | 676 mm | 111 kg | 600 mm | 692 mm | 133 kg |
800 mm | 896 mm | 190 kg | 800 mm | 922 mm | 239 kg |
1000 mm | 1122 mm | 296 kg | 1000 mm | 1166 mm | 369 kg |
1200 mm | 1328 mm | 435 kg | 1200 mm | 1370 mm | 498 kg |
1350 mm | 1520mm | 498 kg | 1350 mm | 1550 mm | 587 kg |
1600 mm | 1795mm | 608 kg | 1600 mm | 1838 mm | 794 kg |
1800 mm | 2034mm | 693 kg | 1800 mm | 2046 mm | 974 kg |
2000 mm | 2242mm | 1029 kg | 2000 mm | 2342 mm | 1376kg |
NOTE: All SN8 product is made to order and the other sizes DN700, DN900, DN1100, DN1500 & DN2300 & DN3200 in SN4 are made to order.
ECOPIPE ™ Loading Guide
When choosing your ECOPIPE™ culvert pipes, it is important that the correct SN (stiffness) rating is allowed for. See below the SN Rating versus loads to help make the correct decision.
SOIL COVER HEIGHTS | |||
LOADINGS | 500 mm | 1000 mm - 10,000 mm | 20,000 mm |
Tractor/Farm Loading | SN4 | SN4 | SN8 |
Light Vehicle Loading | SN4 | SN4 | SN8 |
HN-HO-72 Loading | SN16 | SN4 | SN8 |
ECOPIPE™ IS A NEW, ENVIRONMENTALLY FRIENDLY HDPE CULVERT PIPE MANUFACTURED LOCALLY IN NEW ZEALAND BY INFRAPIPE™.
ECOPIPE™ is manufactured using recycled materials such as Post-Consumer Recycled HDPE (shampoo bottles and plastic containers etc.), recycled HDPE milk bottles and reprocessed HDPE by-product from civil pipe manufacturing.
Our goal is to meet our Circular Economy objectives by ensuring the life-cycle of HDPE products in New Zealand are extended, instead of them going to waste.
Contact us
Contact Us
INFRAPIPE
